Xuất xứ: Notifier
Liên hệ Mr Long: 0993.041.181
Email: kinhdoanhpcccthanglong@gmail.com
Liên hệ Mr Long: 0993.041.181
Email: kinhdoanhpcccthanglong@gmail.com
Mô tả
TÍNH NĂNG - Listed to UL 268, ULC CAN/ULC S529. - Transmitter/receiver built into same unit - Six user-selectable sensitivity levels. - 16' to 328' (use BEAMLRK beyond 230') protection range - Removable plug-in terminal blocks. - Digital display — no special tools required. - Built-in automatic gain control compensates for signal deterioration from dust buildup. - Optional remote test station - Optional long-range kit (BEAMLRK) for applications in excess of 230' (70 m). - Optional multi-mount kit (BEAMMMK) providing ceiling or wall mount capability with increased angular adjustment. - Optional heater kits (BEAMHK and BEAMHKR) for prevention of condensation (not intended to increase or reduce the specified operating temperature).
ĐẶC TÍNH KỸ THUẬT - Voltage: 15 to 32 VDC. - Average Standby Current (24 VDC): 2 mA maximum (LED flashing, SLC @ 24 V). - LED Current: 6.5 mA maximum. - Remote Annunciator Current: 11.2 mA maximum. - Average Current During Testing: 500 mA maximum. - Alarm Current (24 VDC): 8.5 mA maximum (LED on). - Trouble/fault Current (24 VDC): 4.5 mA maximum (LED on). - Fault Condition Current (add to standby current): 100 mA maximum. - Alignment Mode Current (24 VDC): 20 mA maximum. - External Supply (FSB-200S only): Voltage - 15 to 32 VDC; Current - 0.5 A maximum. - Remote Output (alarm): Voltage - 15 to 32 VDC (NOTE: Output voltage is the same as device input voltage.); Current: 15 mA maximum, 6 mA minimum (NOTE: Output current is limited by 2.2K ohm resistor.). - Heater Kit BEAMHK: Voltage - 15 to 32 V; Current - 92 mA maximum @ 32 V (heater only); Power Consumption - nominal 1.6 W @ 24 V, maximum 3.0 W @ 32 V. - Reflector Heater Kit BEAMHKR: Voltage - 15 to 32 V; Current - 450 mA maximum @ 32 V (per reflector); Power Consumption (per reflector) - nominal 7.7 W @ 24 V, maximum 15.0 W @ 32 V. - Detector Dimensions: 10.0" H x 7.5" W x 3.3" D (254 mm H x 191 mm W x 84 mm D).
TÍNH NĂNG - Listed to UL 268, ULC CAN/ULC S529. - Transmitter/receiver built into same unit - Six user-selectable sensitivity levels. - 16' to 328' (use BEAMLRK beyond 230') protection range - Removable plug-in terminal blocks. - Digital display — no special tools required. - Built-in automatic gain control compensates for signal deterioration from dust buildup. - Optional remote test station - Optional long-range kit (BEAMLRK) for applications in excess of 230' (70 m). - Optional multi-mount kit (BEAMMMK) providing ceiling or wall mount capability with increased angular adjustment. - Optional heater kits (BEAMHK and BEAMHKR) for prevention of condensation (not intended to increase or reduce the specified operating temperature).
ĐẶC TÍNH KỸ THUẬT - Voltage: 15 to 32 VDC. - Average Standby Current (24 VDC): 2 mA maximum (LED flashing, SLC @ 24 V). - LED Current: 6.5 mA maximum. - Remote Annunciator Current: 11.2 mA maximum. - Average Current During Testing: 500 mA maximum. - Alarm Current (24 VDC): 8.5 mA maximum (LED on). - Trouble/fault Current (24 VDC): 4.5 mA maximum (LED on). - Fault Condition Current (add to standby current): 100 mA maximum. - Alignment Mode Current (24 VDC): 20 mA maximum. - External Supply (FSB-200S only): Voltage - 15 to 32 VDC; Current - 0.5 A maximum. - Remote Output (alarm): Voltage - 15 to 32 VDC (NOTE: Output voltage is the same as device input voltage.); Current: 15 mA maximum, 6 mA minimum (NOTE: Output current is limited by 2.2K ohm resistor.). - Heater Kit BEAMHK: Voltage - 15 to 32 V; Current - 92 mA maximum @ 32 V (heater only); Power Consumption - nominal 1.6 W @ 24 V, maximum 3.0 W @ 32 V. - Reflector Heater Kit BEAMHKR: Voltage - 15 to 32 V; Current - 450 mA maximum @ 32 V (per reflector); Power Consumption (per reflector) - nominal 7.7 W @ 24 V, maximum 15.0 W @ 32 V. - Detector Dimensions: 10.0" H x 7.5" W x 3.3" D (254 mm H x 191 mm W x 84 mm D).
0 nhận xét:
Đăng nhận xét